Wire and Metal Processing
Wire and Metal Processing developed from Needle Producing
Meikodo has developed a variety of wire rods and metal products by developing traditional needle making technology.
Each time a new product is born, it incorporates new technologies, and as a result of the accumulation, it now has a wide range of processing areas (header processing, point processing, bending, crushing, shearing, pressing, etc.).
Make one manufacturing machine for one product. Because we design and develop from manufacturing machines, we can make products that customers really need.
Each time a new product is born, it incorporates new technologies, and as a result of the accumulation, it now has a wide range of processing areas (header processing, point processing, bending, crushing, shearing, pressing, etc.).
Make one manufacturing machine for one product. Because we design and develop from manufacturing machines, we can make products that customers really need.
Meikodo's wire metal processing is developed from needle making, so it is excellent for processing thin wires. Originally, such fine wire processing was mainly used, but now it is possible to process thick wire while processing metal wire other than needle making.
About wire and metal processing
There are various types of wire rods, so-called “wires”. Meikodo performs straight line processing, pointed processing, header processing, bending, crushing, and shearing.
In addition to wire processing, we also perform sheet metal punching.
In addition to wire processing, we also perform sheet metal punching.
Bending Processing
In order to respond to various requests, we design and manufacture bending equipment in-house, and there are products that process large quantities with automatic machines, but if the quantity is small, we will make jigs.
It is possible to respond to a wide range of requirements because the design starts while considering the material, wire diameter, length and shape.
In order to respond to various requests, we design and manufacture bending equipment in-house, and there are products that process large quantities with automatic machines, but if the quantity is small, we will make jigs.
It is possible to respond to a wide range of requirements because the design starts while considering the material, wire diameter, length and shape.
Crushing processing
It is possible to crush the end face of the needle and the center of the wire.
It is mainly used as a retainer.
Some automatic machines can crush 400 needles in one minute.
When crushing with a header machine, it is also possible to crush in various shapes depending on the shape of the mold.
It is mainly used as a retainer.
Some automatic machines can crush 400 needles in one minute.
When crushing with a header machine, it is also possible to crush in various shapes depending on the shape of the mold.
Press punching
There are single-shot type and normal-phase type, and normal-phase type is used for products with many processes such as needle slider.
In addition to the pressing process, the wire processing process is full of Meikodo's know-how.
There are single-shot type and normal-phase type, and normal-phase type is used for products with many processes such as needle slider.
In addition to the pressing process, the wire processing process is full of Meikodo's know-how.
Washing and Polishing
Meikodo has its own equipment for cleaning products.
Cleaning methods and cleaning agents used vary depending on the shape and size of the product. We are conducting research on cleaning to support various products.
In addition to cleaning, it can also be polished with an abrasive and used to dull the needle tip.
Cleaning methods and cleaning agents used vary depending on the shape and size of the product. We are conducting research on cleaning to support various products.
In addition to cleaning, it can also be polished with an abrasive and used to dull the needle tip.